If you have any questions contact our manager 24/7:
ENG
DC current resistance measurement in inductive and noninductive circuits in the range from 10 µOhm ÷ 2 kOhm for the current of up to 10А
Specific modes for measuring different objects
High precision of measurements both in laboratory environment and at substations
High level of protection and safety conformance in regard to
History of measurements stored in the instrument
Personal computer connection through USB or Bluetooth
Measuring cables of ergonomic design
Power from the mains and/or integrated storage battery
Milliohmmeter – easy-to-use, modern and convenient instrument

Milliohmmeter MIKO-7M(A) new version

Certificates
  • Safety Test Certificate IEC 61010-1:2001
  • EMC Compatibility IEC 61326-1:2005
  • Declaration of Conformity of the Customs Union
DC current resistance measurement in inductive and noninductive circuits in the range from 10 µOhm ÷ 2 kOhm for the current of up to 10А
  • Windings of power and measurement transformers, windings of electric motors, generators, linear compensators and windings of other high-inductance equipment;
  • Contacts of circuit breakers, resistors, buses and other inductance-free circuits;
  • Selector contacts of OLTC devices,  of earthing devices, disconnecting switches and of other detachable and non-detachable contacts.
Specific modes for measuring different objects

The device integrates special-purpose modes for measuring different objects with account of their specific features: resistive and inductance objects; voltage transformers; current and power transformers;.

High precision of measurements both in laboratory environment and at substations

High precision of measurements both in laboratory environment and at substations under industrial noises is achieved owing to calculation and setting (for any resistance) of specific maximum possible test current limited by effective power of the device only. Therefore, ratio between a valid signal to winding resistance and the noise amplitude remains high at any resistance.

High level of protection and safety conformance in regard to
  • exceeding of measuring current;
  • electromotive force (emf) of self-induction.

At disconnection of the measuring cable from transformer bushings or from the instrument as well as at disconnection of the mains cable from the mains in the course of measurement, emf of self-induction of up to several kV is generated in the disconnected circuit and the electric arc appears in the break point.

MIKO-7М is characterized by the redundant protection against emf of self-induction in case of involuntary disconnection of the measuring cable or power cable protecting users from electric shock and the instrument from being damaged.

  • a set of required protective means against superheat of the measuring unit;
  • protection grounding contact in the mains plug and safety earthing terminal on the case of the measuring unit.
History of measurements stored in the instrument
Designed for viewing, copying and deleting of measurement results, stored in the non-volatile memory of the instrument (up to 100 cell measurements).
Personal computer connection through USB or Bluetooth

Allows for:

  • Controlling the instrument with the help of PC;
  • Systematizing and storing the results on computer;
  • Drawing up of measurement reports

Data transmission to the computer and filing of measurement results is performed with the help of a special program developed by the manufacturer.

Measuring cables of ergonomic design

Cables of different length and the grip of alligator type clamps allowing performance of ground measurement as well as the measurement from the cover of transformers of all voltage types.

Power from the mains and/or integrated storage battery

For customer’s choice the MIKO-7M milliohmmeter has two modifications: with an in-built battery (MIKO-7MA) and without an in-built battery (MIKO-7M). The device can also be powered from the mains (≃ 110÷220, 330V).

Milliohmmeter – easy-to-use, modern and convenient instrument

The instrument is easy and convenient to use and has an intuitive interface that has been repeatedly noted by the users.

Specifications Value
Resistance range 10 µOhm ÷ 2 kOhm
Maximum permissible intrinsic error of resistance measurement ±(0.1% + 0.5 µOhm)
Best resolution 0.1 µOhm
Measuring current intensity, А 0.005 ÷ 10
Relative drift of measuring current intensity, %/s ±0.002
Maximum consumed power, W 120
Maximum output capacity, W 60
Mains voltage: AC (valid value) 90 ÷ 253V
Mains voltage: DC 127 ÷ 354V
Period of charging a completely discharged battery, not to exceed 3 hrs
Type of data transmission channel USB, Bluetooth
IP rating in operating state IP40
IP for transportation IP67
Operating temperature range, ºС -20 ÷ +55
Maximum measuring unit weight with battery, kg (MIKO-7MA) 4.0
Maximum measuring unit weight without the battery, kg (MIKO-7M) 2.7
Dimensions, mm 270х250х130
Interface language English
User manuals language English
Calibration interval, year 3
МIКО-7М - ЕАЭС N RU Д-RU.PA01.B.83695; valid until 09.04.2023
Reviews (1)
Comparison of milliohmmeters produced by SKB EP
Comparison of milliohmmeters produced by SKB EP
SKB EP Company sells three types of instruments for measurement of DC electric resistance of windings of transformers, electric motors, electric magnets, cables and of other inductance and inductance-free circuits: the MIKO-7 with basic and updated software, the MIKO-7M, MIKO-8M and the MIKO-9.

We use cookies. By continuing to browse the site, you agree to the processing of your personal data and the Privacy policy.